close
close

How To Change Code On Schlage Lock Be365

How To Change Code On Schlage Lock Be365. After watching this video, you will know how to set up your schlage be365 keypad deadbolt, add a user code, delete a user code, disable all user codes, and how to erase all user. Emergency key override on page 3.

How to Program Schlage BE365 Keypad Deadbolt RatedLocks from ratedlocks.com

The sticker will have three codes on it. Emergency key override on page 3. Next press 3 and wait for the schlage button to blink orange light three times, followed by three beeps.

Add A New Entry Code.

Take the cover off and set it aside. Enter your programming code again. Pushing the shlage button and the 1 key primes the lock to accept a new entry code.

See Programming Guide On Page 10 And Locking And Unlocking On Page 6 For More.

Keep in mind, though, that changing the user code length will also erase. With a keypad deadbolt or lever, you can control entry to your home more easily. Next press 3 and wait for the schlage button to blink orange light three times, followed by three beeps.

The First Four Numbers Must Be Different From All Of The User.

Standard operation if lighting is low, press the schlage button to illuminate the keypad before beginning. Press the schlage button followed by the number 6. Press the schlage button and the.

Changes To Your Lock, You Need To Change The Preset Programming Code.the Preset Programming Code Can Also Be Found On A Sticker On The Back Of The Keypad Assembly And The User.

Press and release the schlage button. Replace the battery in your lock and try. The sticker will have three codes on it.

If Done Correctly, You Should See The Button Flash At Which Point The Unit Will Beep Three Times, And You Would Then Enter Your Old Four Digits Lock Key Code Twice.

Press the schlage button and number 1 at the same time. How to delete all user code on schlage door lock. The schlage button will light green for.

Leave a Reply

Your email address will not be published.